Door for the smoking shed of SVT 411

Type Smoker doors
Group Cast iron oven casting 
Inner dimension, mm 325 х 290 
Outer dimension, mm 415 х 380 
Color Black 
Weight 9.0 kg 
Material cast iron 
Description 1 flap, solid blank, right. 
Manufacturer SVT Oy 
Country Finland 
Code EAN6419876004113

Door for the smoking shed tight, 1-folding, continuous, right SVT 411

The door for the smoking shed of SVT 411 - has the average size and executed in the form of a square. Very popular chimney door door SVT. The door for the SVT 411 oil lamp is single-leaf, airtight, hinges on the right that are ideal for installation in a small stove or small smokehouse and fit perfectly into any interior. You will be surprised at the high quality of the material and the perfectly treated surface.

Door SVT 411 deaf - closed type without glass. The surface of the door SVT 411 on the frontal part is decorated with decorative molding in the form of a schematic image of a flame and a geometric ornament around the perimeter of the door frame, which makes the fireplace door of the SVT 411 a non-ordinary look.

A sealing cord, made of heat-resistant ceramics, is installed along the contour of the decorative element, it can withstand temperatures up to 1000 ºС, which prevents smoke from seeping through the cast iron joint. There is a possibility, if necessary, to replace the decor is not glass.

The door is sealed and even if you close the chimney with unburned coals, they will go out without the inflow of air required for burning and there will be no carbon monoxide from the firebox into the room.

The locking mechanism and the non-flammable gasket installed along the contour of the door provide hermetic closing.

The original convenient handle in the form of a hook is located in the opposite part of the hinges of the door, which allows you to firmly press the door to the frame.

In the lower part of the door for the smokehouse SVT 411, there is an adjustable gate-type hermetic grille with a convenient handle in the shape of a flower for the flow of oxygen into the firebox, which allows you to adjust the intensity of the flame.

Raw materials used in the oven door 411 SVT , do not contain harmful substances to health.

Door material for the furnace SVT 411 - gray cast iron. Cast iron doors are distinguished by high strength and thermal stability: the door does not burn through, does not rust, practically does not give in to deformation under the influence of high temperatures and has a long service life.

The door for the fireplace SVT 411 is painted with two component paint, which allows you to maintain the appearance of the door for more than 30 years of explanting. Paint can withstand up to 1000 degrees.

For easy installation, there are 4 holes in the door frame.

The chimney door of SVT-411 is effectively used for installation in smokehouses, and also furnaces including. and stoves for baths that use solid fuel for combustion, made of brick or stone. SVT doors can be installed both during the laying of the fireplace or stove, and after its completion into an already finished product.

Chimney accessories has not only practical, but also aesthetic value. The elegant shape of the door for the SVT 411 stove reminds of the ancient architecture, creating in the house the unique romantic atmosphere of the old castle.

It is installed in closed type foci. Thanks to this device, the burning procedure becomes safe, because sparks do not get into the heated rooms of a country house, and the fuel burns almost completely in the unit chamber.

Buy Finnish casting has long been considered the key to durability and proper functioning of any furnace.

Before flooding the fireplace for the first time, you need to wait a couple of weeks until it is completely dry, you need to clean metal surfaces from possible stains and examine if the glass in the doors is too tight, otherwise it may burst during expansion.

SVT fireplace mouldings are made of cast iron that has proved to be the best material for fireplaces over the years. Cast iron withstands high temperatures and does not deform due to big temperature differences.

GLASS: Cast iron doors are equipped with mineral glass that can withstand heat up to 800°C. Despite this outstanding feature mineral glass cannot stand mechanical hits better than normal glass. Therefore products should be handled with care before and during assembly and while in use.

IMPORTANT! Glasses are installed quite loose on purpose, so that there would be no tension in the glass. If any cracks should occur during the first times of heating, you should immediately contact the produced or wholesaler in your country.

PAINT: All products are painted with two-component Thermodur 600 heat-standing paint that can withstand heat up to 600°C. It would be wise to have good fresh air flow during the first times of heating as some oil fumes might evaporate.

MAINTENANCE: All cleaning and maintenance procedures should be done when the mouldings are cold. Cat iron parts should be cleaned with cooking-oil that will form a protective cover on cast iron. Glass should be cleaned with ashes, to have the best result you should use a damp cloth and stick it in the ashes and then wipe the glass with it. To clean the glass from the ashes use a dry cloth.

WARRANTY: Fireplace mouldings are covered with one-year warranty that will cover any production mistakes. Reclamations should be made in written together with proof of purchase. Any mishandling, assembly mistakes or misusing will not be covered by warranty.

INNER DIMENSION 325x290 mm

OUTER DIMENSION 400x370 mm